Analysis of parameters of ground vibration produced from bench blasting at a limestone quarry     

Ali Kahriman 《Soil Dynamics and Earthquake Engineering》2004,24(11):887-892

The aim of this study is to predict peak particle velocity level at a limestone quarry located in Istanbul, Turkey. The ground vibration components were measured for 73 blast events during the bench blast optimization studies during a long period. In blasting operations; ANFO (blasting agent), gelatine dynamite (priming) and NONEL detonators (firing) were used as explosives at this site. Parameters of scaled distance (charge quantity per delay and the distance between the source and the station) were recorded carefully and the ground vibration components were measured by means of vibration monitors for every event. Then, the data pairs of scaled distance and particle velocity were analyzed. The equation of scaled distance extensively used in the literature was taken into consideration for the prediction of peak particle velocity. At the end of statistical evaluations, an empirical relationship with good correlation was established between peak particle velocity and scale distance for this site. The established relationship and the results of the study are presented.  相似文献   

Earthquake relocation and 3-dimensional crustal structure of P-wave velocity in cen-tral-western China     

杨智娴  于湘伟  郑月军  陈运泰  倪晓晞  Winston CHAN 《地震学报(英文版)》2004,17(1):20-30

IntroductionUnderstandingthemechanismofcontinentalearthquakesisveryimportantforseismichaz-ardpreventionandearthquakeprediction.Themodernseismotectonictheoryandtheideaofearthquakepredictionaredevelopedmainlyfromthestudiesoninterplateearthquakes,whicharedifficulttoexplainthephenomenaofintraplateearthquakes,suchasthecontinentalearthquakesoccurredinChinesemainland.Whiletheinterplateearthquakesoccurredalongtheplatebounda-ries,theintraplateearthquakesdistributediffuselyintheinterioroftheplates.Thus…  相似文献   

Estimating the seismic displacement of friction pendulum isolators based on non‐linear response history analysis     

Keri L. Ryan  Anil K. Chopra 《地震工程与结构动力学》2004,33(3):359-373

A procedure for developing equations that estimate the isolator displacement due to strong ground motion is applied to buildings isolated with the friction pendulum system. The resulting design equations, based on rigorous non‐linear analysis, offer an alternative to the iterative equivalent‐linear methods used by current U.S. building codes. The governing equations of the system are reduced to a form such that the median normalized displacement of the system due to an ensemble of ground motions is found to depend on only the isolation period—a function of the curvature of the isolator—and the friction force at incipient slip normalized by peak ground velocity. The normalization is effective in minimizing the dispersion of the normalized displacement for an ensemble of ground motions, implying that the median normalized displacement is a reliable estimate of response. The design equations reflect the significant (20 to 38%) increase in displacement when the excitation includes two lateral components of ground motion instead of just one component. Equivalent‐linear methods are shown to underestimate by up to 30% the exact median displacement determined by non‐linear response history analysis for one component of ground motion, and building codes include at most a 4.4% increase for a second component. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

叠前深度偏移述评   总被引：4，自引：2，他引：4  

罗银河  刘江平  俞国柱 《物探与化探》2004,28(6):540-545

叠前深度偏移是理想的改善复杂地区和强横向速度变化的地震资料成像技术,笔者就4种典型叠前深度偏移方法的理论基础与技术特点,存在的问题及国内外最新进展进行了讨论.  相似文献   

苏鲁造山带区域地壳山根结构特征   总被引：15，自引：6，他引：15  

徐纪人  赵志新 《岩石学报》2004,20(1):149-156

本利用苏鲁大别造山带及其邻区的三维P波速度资料，详细对比研究了苏鲁与大别超高压变质带莫霍面深度和深部P波速度结构分布特征。结果表明，尽管苏鲁、大别超高压变质带都具有上地壳明显高速且上凸；中地壳增厚；下地壳埋藏较深且下凹等共同的P波速度结构特征，与大别地区相比较，苏鲁超高压变质带还存在着独特的区域性特征。从地貌上看，苏鲁地区山脉已经基本消失。苏鲁超高压变质带的地壳厚度为32～33公里，深于其周围地区2～3公里，但是莫霍面下凹程度远不如大别地区，造山带地壳山根已逐步趋向消失。苏鲁地区上地壳P波速度高于大别，比其周围地区约快1～1．2km/s，有可能显示了该区有更多高速、高密度的超高压变质岩折返到上地壳与地表的岩石物性效果。大别造山带山脉依然存在，莫霍面下凹更明显，沿NWW向串状残留地壳山根最深为37～38公里，深于其周围地区3～4公里。对比研究结果表明，由于区域构造运动的作用，苏鲁大别造山带中的不同地段，在其造山、演化过程中也存在着差别。苏鲁的造山运动起始虽略晚于大别，但结束的更快，比大别更早进入了造山运动的后期。分析促使苏鲁造山运动进程加速的主要构造原因可能有两点，郯庐断裂带的左旋走滑运动以及通过中国华北区域的大范围NW-SE向扩张应力场的影响。大区域构造背景加速了苏鲁造山带地表高山侵蚀过程的同时，随着山根浮力的不断减弱，地壳深部山根逐渐趋向消失。地壳速度结构特征有可能反映了苏鲁造山带的地壳山根随着地表山脉的侵蚀而减弱，趋向消失的过程。  相似文献   

Detection of Methane Hydrate-Bearing Zones from Seismic Data     

Takao Inamori  Masami Hato 《Resource Geology》2004,54(1):99-104

Abstract. The MITI Nankai Trough wells were drilled offshore Japan in the Tokai area in 1999 and 2000. The occurrence of methane hydrate was confirmed by various indicators in the borehole logs and from core data. These findings have a large impact on potential future Japanese energy resources and other related-scientific interests.
We first tried to find the methane hydrate-bearing zones using interval velocities derived from NMO velocity analysis. However, this analysis produced poor resolution. To achieve a more detailed delineation of the gas hydrate- and gas-bearing zones, we executed a seismic impedance inversion calibrated by the logs from two of the MITI Nankai Trough wells. Although these two wells are only about 90 m apart, we were able to produce an impedance section with fine detail by adopting a simple initial model and incorporating physical properties of the methane hydrate-bearing zones. The locations of the methane hydrate-bearing zones are readily apparent in the final section.  相似文献   

静止环境中有阻力圆盘浮力射流特性的研究——(II)流场特性分析          下载免费PDF全文

方神光  槐文信 《水科学进展》2004,(5)

在数值计算成果的基础上,对阻力圆盘浮力射流的流场进行了分析和总结,基于轴线流速的变化规律将盘后流场分为3个区域:回流区、过渡区和自相似区。得到了回流区的长度随弗劳德数F0、孔口直径D/d以及盘离孔口的距离H/d的变化规律,并得到了工况为H/D=1,D/d=2,6和H/D=3,D/d=2在不同弗劳德数F0条件下的横截面上的流速分布和达到自相似区的最小长度;结果表明弗劳德数F0的大小是决定绕流流态的主要因素;同时分析了由正常绕流发展到非正常绕流的压力场变化,发现由于弗劳德数F0的增大而导致流场中出现的第三个负压中心的大小和位置与绕流是否能正常发生存在密切的关系。  相似文献   

Blast Induced Damage and Dynamic Behaviour of Hangingwalls in Bench Stoping     

E. Villaescusa  I. Onederra  C. Scott 《Fragblast: International Journal for Blasting and Fragmentation》2004,8(1):23-40

This paper presents the results of a comprehensive monitoring program designed to investigate the extent of blast induced damage experienced by rock masses extracted by bench stoping methods. An array of triaxial geophones and extensometers were used to monitor blast vibration attenuation and measure hangingwall deformations during stope extraction. In addition, pre and post surveys of the hangingwall rock mass were conducted using a TV borehole camera and cavity survey instrumentation. These surveys were later used to calibrate damage profiles into the stope hangingwalls.

Peak particle velocity, hangingwall deformation measurements and stope surveys were used to develop a site specific damage model that allowed engineers to asses drilling and blasting configurations to minimise the extent of pre-conditioning and damage. In addition the study included the analysis of the frequency response, displacements and accelerations experienced by the excavation as extraction and mine filling progressed. This work aimed at improving our understanding of the influence of blasting on the dynamic behaviour of stope hangingwalls.

The study demonstrated that estimates of the maximum extent of rock mass pre-conditioning and/or damage made through the application of the Holmberg-Persson approach compared well with measured results. In addition, the study found that dynamic loading imparted on an exposed hangingwall from subsequent stope blasting was also expected to contribute to rock mass weakening and that mine filling was crucial to arrest further deterioration. Hangingwall accelerations were used to demonstrate that larger openings may be more susceptible to dynamic loading.  相似文献   

Determination of the elastic modulus set of foliated rocks from ultrasonic velocity measurements   总被引：2，自引：0，他引：2  

Insun Song  Mancheol Suh  Yong-Kyun Woo  Tianyao Hao 《Engineering Geology》2004,72(3-4):293-308

Ultrasonic measurements of compressional and shear wave velocities under hydrostatic pressure up to 70 MPa were carried out on cylindrical specimens cored across and along the foliation planes. Our measurements revealed that the foliation of the metamorphic rocks induces a clear velocity anisotropy between two orthogonal directions; faster along the foliation plane and slower across the plane in most rock types. All velocity components monotonically increase with the confining pressure, probably due to the closure of microcracks distributed in rock specimens. We determined the complete set of dynamic moduli of foliated metamorphic rocks with two assumptions; transverse isotropy due to the foliation and ellipsoidal seismic energy propagation from a point source. The calculated elastic moduli referring to different directions could be valuable for the design of various engineering structures in planar textured rock mass.  相似文献   

描述黄河中下游河道横断面形态的新指标     

孙赞盈  曲少军  苏运启  杨明 《山地学报》2004,22(2):161-164

描述河流横断面的窄深程度,无非是用来衡量它对过流能力和输沙能力的影响大小,及其在河流地貌方面的时空上的调整变化。回顾总结了以往描述横断面形态的常用指标,包括河相系数、宽深比,或湿周与平均水深的比值,指出这几种指标在描述黄河中下游河道时所存在的共同缺点:(1)缺乏物理意义;(2)不能真正代表断面的窄深程度;(3)明显的夸大了宽浅和窄深断面的差别。从表称流量的概念出发,作者认为,应该使用具有明确物理意义的等面积的表称流速来描述断面形态。如果用表称流速来衡量黄河下游河南和山东河道的断面形态的差别,就会发现,断面形态的不同,其对过流能力的影响不过1:2,远不象河相系数和宽深比所描述的达到1:6甚至1:11那样的悬殊程度;黄河下游河道主槽“多来多排”的主要影响因素是表称流速。  相似文献